Voyage Audio Spatial Mic, Руководство пользователя

Страница: 8 / 45

Voyage Audio Spatial Mic User Guide
Getting To Know Spatial Mic
Mounting
A ¼-20 thread mount on the back of the mic allows for hard-mounting to a standard microphone
stand. Screw the included ¼-20 to ⅝’’ mini swivel ball hard-mount into the ¼-20 threads on the
back of Spatial Mic. Screw the other end into your microphone stand. Note that this method
does not provide acoustic isolation from the mic stand.
For acoustic isolation, use a Rycote InVision shockmount (sold separately). Place Spatial Mic in
the shockmount so bottom of mic is flush with inner shockmount ring and tighten screws around
the mic. Ensure microphone cannot slip out of shockmount and knob can be accessed.
Powering
Spatial Mic can be bus powered through the same USB-C jack used for data transfer. Operation
with a hub is not guaranteed (and beyond the scope of this user manual) due to the number and
variety available. If attempting to use Spatial Mic with a hub, please ensure that it is
self-powered and can provide 500mA to the mic.
When using the ADAT lightpipe digital output, power to Spatial Mic must be applied via USB-C
jack or micro-USB.
8