Voxx Directechs DS3+, Руководство по установке

Страница: 17 / 21

17
DS4+ HONDA7
© 2021-11-24 VOXX•DEI LLC. All rights reserved.
Soft reset
A module reset will only erase the steps performed in "Module programming" section. The firmware and settings flashed to the module will
not be affected.
1
If required for your installation,
connect
all the harnesses to the DS4+,
EXCEPT
the 12-pin main
power harness. Press and hold the programming button, then connect the 12-pin harness to the
module.
Connect all but the
12-pin harness
2
Wait
3 seconds until the LED turns ON solid orange then
release
the programming button. The
LED turns ON solid red.
& &
Release Solid Solid
Hard reset
Warning Against Executing a Hard Reset!
A hard reset will revert the flashed firmware back to its default settings. Depending on the installation, some settings may need to be
reconfigured. Connect your module to a computer and use the web configuration tool to edit its programmable features.
1
If required for your installation,
connect
all the harnesses to the DS4+,
EXCEPT
the 12-pin main
power harness. Press and hold the programming button, then connect the 12-pin harness to the
module.
Connect all but the
12-pin harness
2
After 3 seconds the LED turns ON solid orange.
Keep holding
the programming button until the
LED flashes red, then orange slowly.
Hold Solid Flashes
& &
3
Release the programming button. The LED turns ON solid red. &
Release Solid