ACM Keypad PIN Codes
When PIN Code is enabled for an ACM Keypad, e
ach time the keypad’s power button is pressed it will require a 4
digit PIN code to access vehicles. To access multiple vehicles without re-entering the PIN code, press the CLR
button. After 2 minutes of inactivity the keypad will enter sleep mode and will require the PIN code be re-entered.
Lost or Forgotten Keypad PIN Codes
Resetting a Keypad with an Unknown PIN Code
The following procedure will take you through the process of resetting a PIN on a Keypad if the current PIN is
unknown.
1.
Login to the LSS station & locate the keypad in question.
2.
Deselect the “PIN REQUIRED” check box for that keypad.
3.
Select “SAVE”.
Note: If the keypad has already been authenticated for the day with the unknown PIN, you must wait until the keypad
operating time has expired for the day before carrying out these next steps:
1.
Authenticate the keypad.
2.
Press and hold the “CLR” button on the keypad for 5 seconds until the light flashes green 4 times.
3.
Enter in the new 4 digit PIN within 10 seconds, the light will flash back green 3 times.
4.
Re-enter the new PIN again to confirm your entry, the light will flash back green 4 times.
5.
Press and hold the “0” button on the Keypad for 10 seconds until the light flashes green 3 times.
6.
Login to the LSS station and locate the keypad in question again.
7.
Select the “PIN REQUIRED” check box for that Keypad.
8.
Select “SAVE”.
9. Re-Authenticate the Keypad, it should now be operating with the new PIN number.
Master Keypads
A Master Keypad has uninterrupted access to Lot Mode vehicles at all times and does not need the ACM for
authorization. It is recommended this unit be kept in a secure location and only used for emergency situations.
A master keypad will only work with the dealer it is registered with in the LMS website.
Содержание ACM
Страница 1: ...ACM Keypad User Guide ...
Страница 5: ......
