background image

 

Lot Mode / Consumer Mode Transitioning  

When a vehicle is sold it will be necessary to transition the security system from Lot Mode to Consumer 
Mode using an ACM Keypad. Once in Consumer Mode the ACM Keypad will no longer have control of 
the vehicle’s security system.  

Note:

 An ACM keypad must be authorized for transitioning a vehicle out of Lot Mode. The capability for 

an individual keypad to transition a vehicle out of lot mode is controlled and assigned by the lot manager.  
 

Note:

 Consumer 

Mode enables all of the device’s security functionality by use of the factory transmitters. 

 

 

FORD Security Systems

 

Transitioning into Factory Keyless Upgrade Mode - FORD

 

 

 

Open a vehicle door. 

 

Turn the ignition ON. 

 

Press PWR on the keypad and enter your personal PIN Code   

 

 

Enter the vehicle number into an ACM keypad.

 

 

Press the UNLOCK button. 

 

Press and 

Hold the TRANS button for 3 seconds, the horn will chirp 3x’s. Release Button. 

 

Press and 

Hold the TRANS button again for 3 seconds, the horn will chirp 3x’s. Transition complete. 

 

Turn OFF the ignition and c

lose the vehicle’s door. 

 

 

 

 

 

Содержание ACM







Отзывы: