Voxx ACM, Руководство пользователя

Страница: 2 / 6

Keypad Authentication
Authenticating the ACM keypad
Each ACM keypad must be authenticated daily to enable it
s use and upload it’s stored data.
Authentication takes place automatically the first time the PWR (power) button is pressed, providing it is
within the allowable window of operation for that particular keypad and within range of the ACM. Two
GREEN flashes, indicate the keypad is authenticated for use, 2 RED flashes indicate that the keypad is
not authorized for use. Check your LMS settings to ensure the correct time of day is entered for the
keypads user profile if the keypad does not authenticate.
De-authenticating the ACM keypad
De-authenticating the keypad will disable its use until it has been re-authenticated as mentioned above.
If changes are made in LMS after a keypad has been authenticated it will be necessary to re-
authenticate the keypad in order for those changes to take effect.
To De-
authenticate or “Zero out” the keypad, press the power button then press and hold the 0 key for
10 seconds, the LED will flash 2 times indicating the keypad has been de-authenticated.
Programming a Vehicle ID/Stock Number to the Security System (LOT Mode)
Programming the security system with a Vehicle ID/Stock Number will automatically enter the system
into Lot Mode. Lot Mode allows ACM keypad users access to dealership vehicle inventory via the ACM
Keypad by entering the vehicle specific ID/Stock number. Follow the steps below to program a vehicle
ID to the security system.
1. Turn the ignition ON.
2. Press and release the override button 3 times, the system will chirp 1 time.
3. Enter the desired VEHICLE ID NUMBER into the ACM keypad and then press the LOCK button.
4. The system will respond with 1 chirp.
5. Turn the ignition OFF to exit transmitter programming, the system will chirp 2 times to confirm
exit.
Accessing Vehicles
The keypad will access each veh
icle individually based on the vehicle’s stock number. Access a vehicle
by following the steps below.
1. Press the PWR button - if necessary enter your 4 digit PIN.
2. Enter the vehicle stock number.
3. Press the button of the function you wish to activate. (lock, unlock, etc..)
Note: The 4 digit PIN mentioned in step 1 is only necessary if PIN Code has been enabled in the LMS
system for the keypad.