background image

18

ENGLISH

The VOXOA K50 monitors provide a smooth response that is accurate, and at the same time, pleasant to listen to. 

Main features:

• Two-way, active studio monitor with ported, tuned enclosure, providing extremely accurate monitoring for recording 

studio, post-production and multi-media applications.

• The K50 Series employs woven carbon fi ber, butyl surround woofers, and as a result, each monitor produces a 

tight and controlled low frequency response.

• 1.25-inch silk-dome tweeter with Ferro fluid cooled neodymium magnet, provides sweet and accurate high 

frequency response for the K50 series with low distortion.

• The K50 features active electronics including a Bi-Amp power amplifi er with 50 watts of low frequency power and 

25 watts for the high frequency power . 

• Active crossover utilizing a multi-pole design for linear response from bottom to top.

• Interfacing the monitors to most any -10 or + 4dB signal source is quick and easy thanks to the K50 assortment of 

input connectors. The K50 has a balanced input on a TRS 1/4-inch jack and unbalanced input on an RCA jack. 

• A/V shielded for multimedia applications providing clean operation near computer monitors.

• MDF (Medium Density Fiberboard) construction, extremely rigid, delivering maximum SPL.

• The K50 monitors fit in any decor and thanks to their black lacquer finished baffle, they provide an attractive 

enhancement to any control room.

• One-year extended warranty.

 

MAIN FEATURES

K50 (050713) .indd   章節2:18

2013/5/7   下午 06:07:10

Содержание K50
















Отзывы: