24
ENGLISH
SETTING UP THE K50
NOTE
: Before plugging in and turning on, remember the “last on, fi rst off” rule of power amplifi ers (and powered
monitors). When powering up your system, be sure that all the wires are connected, turn your mixer and any other
outboard gear on, and then last turn your K50 on. When powering down, turn your K50 off fi rst and then your mixer
and outboard gear.The K50 connections can be made via one of the two rear panel Audio Inputs. You can use RCA
inputs for unbalanced -10dBV level signals, or either the 1/4-inch inputs for balanced, +4dBu level signals.Follow the
simple steps and diagram below for a quick connection using a standard recording console’s control room outputs.
K50 (050713) .indd 章節2:24
2013/5/7 下午 06:07:12
