K50
K50
23
ENGLISH
SETTING UP THE K50
Speaker Orientation
The K50 Series can be used in either the vertical or horizontal position, however for best results they should be set
up in the vertical position. When using the monitors in the horizontal position, be certain to place the left and right
side tweeters on the outer most sides. This will improve the stereo imaging and bass response by increasing the
coupling of the low-end drivers.
When choosing the height of your monitor system, be careful to avoid reflections off the surface of the mixing
console. These refl ections arrive at the listening position slightly delayed from the original sound resulting in strange
cancellations and overall unpredictable response. Visualize straight lines representing the beams of sound radiating
from the monitors and choose a height that reduces the occurrence of reflections that will end up in the prime
listening spot. In most cases, the ideal position is slightly behind and above the mixing console’s meter bridge.
Connecting the K50
• Lower your mixer’s master outputs to all the way off.
• Connect the mixer’s Left Control Room output to the left-side K50 LINE INPUT and the mixer’s Right Control
Room output to the right-side K50 LINE INPUT.
• Set the K50 input Volume control to the 2 o’clock position.
• Run an audio signal (like some music from a CD) through your mixer and raise the Control Room level to a
comfortable listening level.
K50 (050713) .indd 章節2:23
2013/5/7 下午 06:07:12
