Voxelab Aquila X2, Руководство пользователя

Страница: 27 / 32

Trouble shooting
Q：
How to upgrade the firmwares?
A：
1. Insert the TF card into the card reader
2. Insert the card reader into the USB interface of the computer
3. Create a new folder named firmware in TF card
4. Copy the xx.bin file into the "firmware" folder
5. Insert the TF card into the TF card socket of the machine
6. Restart the machine
Q：
How to get the firmwares?
A：
Enter the official website <www.voxelab3dp.com> and download them at the
<Download Center>.
Q：
What if the model warps or is unable to stick to the build plate?
A：
1. Build plate temperature is too low, increase its temperature accordingly；
2. Filament failed to adhere or bond on the build plate, use glues to enhance the
adhesion；
3. Distance between the build plate and the nozzle is too far or the build plate is
not leveling enough, re-leveling the build plate accordingly.
Q：
What if the accuracy of model is not good?
A：
1. Please ensure the normal status of the synchronous belt, neither loose nor
tight；
2. Adjust the transmission ratio in the settings: turn up the transmission ratio if
the size turns smaller and turn down the transmission ratio if the size turns larger.
Q：
What if the nozzle cannot be heated?
A：
1. Please check the digital display of the temperature; if the temperature
displayed in error, replace the temperature sensor cable；
2. If the temperature displayed normally, replace the heating cable.
Q：
What if the axis cannot be moved?
A：
1. Check the wire of the electric motor；
2. Contact us by email listed.
Email: support@voxelab3dp.com
Q：
What if the screen turns dark?
A：
1. Please check the wire of the screen and re-plug it；
2. Refresh the firmware to see if the screen can back to normal. Contact the
after-sales personnel if not.
Q：
What if the build plate cannot be heated?
A：
Please check the digital display of the temperature. If the temperature inproper,
please replace the plate wires. Otherwise, please replace the heating wires.
26