Voxelab Aquila S2, Руководство пользователя, Страница: 25 / 36

Start printing
13
File names must be Latin letters or numbers, Chinese characters
and other special symbols are unaccepted.
Decompressed the slicing software package in the TF card and install
it to your computer. Open the software, load the stl file for slicing, then
saved the sliced file to the TF card.
1. Ensure that the build plate has been leveled before printing. 打印开始前请确保打印机已经完成调平；
2. Ensure that the filament has been loaded in an appropriate approach. 打印开始前请确保耗材安装正确，没有打结或卡住；
3. Please clean extruder before printing (Load the filament for a while to extrude all the melted filament printed last time). 打印开始前请将喷头内的耗材清理干净（喷
头内可能残留少量耗材，请进丝一段时间，确保上一次打印的耗材已全部挤出）；
4. Do not leave the printer unattended during operation. 不允许在长时间无人看守的情况下使用3D打印机。
Insert the TF card - Choose [Print]- select a file to print
23
开始打印
插入TF卡，按压旋钮，选中【Print from Media】，选择要打印的文件。
将TF卡中的切片软件安装包解压并安装在电脑上。打开切片软件，导入stl文件进
行切片，将切片后的模型文件存入TF卡。
文件名需为拉丁字母或数字，不能为汉字或其他特殊符号