Voxelab Aquila S2, Руководство пользователя, Страница: 16 / 36

Install the gantry profile and screen kit
7
Gantry profile *1
1. Fix the profile on the upper end of the gantry with four
M5x25 screws.
2. Lock screen bracket and screen kit with two pieces
screws ST2.9*9.5.
3. 4. Screen kit *1
Screen bracket *1
Hexagon socket head spring
washer combination screws
M5x25 *4
M5x25
M5x8
ST2.9x9.5
14
Connect the display screen kit with
screen flat cable.
Lock the screen kit onto printer base
side using two M5x8 screws.
Hexagon socket flat round
head screws M5x8 *2
Note: Make the counterbores within the profile and face
upwards. Four cap screws are slotted in the counterbores,
please tighten the screws down to the profile edge.
Hexagon socket head
tapping screws ST2.9x9.5 *2
用4颗M5x25螺钉将顶部型材安装在两侧Z轴型材的上方。
用2颗ST2.9*9.5螺钉将屏幕支架固定在屏幕背部。
用2颗M5x8螺钉将屏幕组件安装到设备
底座右侧。
连接屏幕排线。
注意：顶部型材的沉头孔朝上，4颗螺钉头部藏在型材沉孔里面，
螺钉安装好后与型材齐平。
顶部型材 *1
内六角圆柱头弹垫组合螺钉
M5x25 *4
内六角平圆头螺钉M5x8 *2
显示屏组件 *1
显示屏支架 *1
内六角圆柱头自攻螺钉
ST2.9×9.5 *2
安装顶部型材和屏幕组件