Voxelab Aquila S2, Руководство пользователя, Страница: 14 / 36

Install X-axis tensioner
4. Insert the synchronous belt buckle into the sheet metal slot at the
back of the extruder and tighten X-axis tensioner.
5. Lock the X-axis limit sensor kit on the X-axis assembly with two M4x8 screws.
M4x8
12
Attention: Please do not tighten the X-axis tensioner screws with too much force.
注意：切勿用蛮力锁紧张紧器的塑料旋钮。
安装X轴张紧器
将同步带两端卡入喷头组件背部的卡槽中，调节张紧轮组件的塑料旋钮直至
同步带达到合适的张紧度。
用2颗M4x8螺丝将X轴限位传感器固定在X轴组件上。