Vox Valvetronix, Руководство пользователя, Страница: 25 / 61

21
Storing Stuff, Writing Stuff & More...
s mentioned earlier, your Valvetronix combo can store and instantly recall 32 pro-
grams. These 32 programs are stored in 8 Banks, each of which contains 4 chan-
nels (8 x 4 = 32!). The bank numbers (shown in the BANK display...clever stuff,
huh!?) are 1 , 2 , 3 , 4 , 1. (“1” with a DOT after it), 2. (“2” with a DOT after it, etc,), 3. and 4. .
The 4 channels (each of which has its own CHANNEL Select Button and “I’m selected”
LED indicator - remember?) are cunningly numbered 1 to 4.
NOTE: Whenever we refer to a program in this Guitarist’s Guide we do so as follows:
“bank number - channel number.” For example: 3 - 2 means the program stored in bank 3,
channel 2. Likewise, 2. - 4 refers to the program located in Bank 2., channel 4. Geddit?
Although your unit comes with 32 preset programs already stored in it (see
page 34), each and every one of ‘em can either be totally rewritten or “custom tweaked”
to your heart’s content. And, once you’ve done that, if you ever want to recall the original
32, that’s easy to do...in fact, we already did that in the QUICK START section (see also
page 4).
In this section we’re gonna get into recalling programs, switching between pro-
grams and even writing your own. And, don’t worry, it’s all so simple even your drummer
could do it! So, let’s get to it...
P
ROGRAM
S
ELECT
M
ODE
Providing you aren’t using the built-in tuner (page 30), in Manual Mode (page 28) or half-
way through either recalling (see below) or writing a program (page 25), then your Val-
vetronix amp will be in “Program Select Mode.” How can you tell if it is? Simple, amigo –
just look at the BANK Display. If it doesn’t show “
” (meaning it’s in “Manual Mode”), “ ”
(meaning it’s in “Tuner Mode”), “ ” (meaning it’s in “Silent Tuner Mode”) or is flashing a
number (meaning you’re either halfway through recalling or writing a program), it’s in
“Program Select Mode.” Let’s assume it isn’t in “Program Select Mode” for a second…
G
ETTING TO
“P
ROGRAM
S
ELECT
M
ODE
.”
So, your BANK Display is either flashing or displaying either “ ”, “ ” or “ ” and
you wanna be in “Program Select Mode,” huh? Well, to get there all you do is one
of the following:
1. If the BANK Display is flashing a number, merely hit the TUNER/CANCEL
button and you’ll be back in “Program Select Mode.” How do you know?
A