Vox Tonelab LE, Руководство пользователя

Страница: 7 / 59

7
L
ISTEN TO THE
P
ROGRAMS
8. Use the BANK UP, DOWN switches (5.1) to select a bank 1–30.
Notice that the number in the bank display (3.4) blinks and changes.
HINT: ToneLab LE has 120 programs, organized into 30 banks with four programs in each bank (30 x
4 = 120). When shipped from the factory, banks 1–10 contain 40 programs. (The programs in
banks 1–10, 11–20 and 21–30 are identical to each other) Program Select mode lets you select
these programs. There’s also an effect ON/OFF mode that lets you turn individual effects on/off.
9. Use the program select 1–4 switches (5.2) to select a program.
The program LED you selected will light, and the number in the bank display will also change
and stay lit. Go ahead and play your guitar.
For example if you want to select program 3-1 (bank 3, program 1), press the BANK UP or
DOWN switch to make the bank display read “3,” and then press the program select 1 switch to
make the LED light.
If you’re selecting a program in the same bank, simply press a program select 1–4 switch. If you
want to select a program from a different bank, you’ll need to perform steps 8 and 9 in that order.
NOTE: If you can’t select a program, you’re probably not in Program Select mode. Get back into Pro-
gram Select mode as described in “Program Select mode” (p.22).
HINT: The preset programs cover an amazing range of sounds; fat hi-gain lead sounds, nostalgic
clean sounds that work best with your rhythm (neck) pickup, aggressive modern crunch sounds
for heavy riffing with your lead (bridge) pickup, and much more.
10. The expression pedals are assigned to control the most appropriate parameters for each
program, such as wah, volume, delay, reverb input level, or other effect parameter. The
CONTROL switch is assigned functions such as TAP tempo input of the delay time.
11. Press and hold down the BANK UP switch for one second to turn on the switch’s green LED and
to enter Effect On/Off mode. Effect On/Off mode lets you turn each effect on or off just as if you
were using a set of stomp boxes. Program select 1–4 will turn the pedal, modulation, delay, and
reverb on or off respectively, and the BANK DOWN switch will bypass the insert effect.
S
WITCHING EFFECTS ON
/
OFF
12. The model select buttons will be lit (ON) or dark (OFF) to indicate the on/off state of each
effect. If you press a button that is dark or turn the model selector, the effect will turn on and
the model select button will blink. If you press a button that is blinking, the effect will turn off
and the button will go dark.
C
REATE YOUR OWN
S
OUNDS
13. To adjust the sound of the AMP model, use the AMP selector to select one of the sixteen
amp models. Then you can simply adjust the sound pretty much in the same way as if you
were really using the actual model of guitar amp you selected.
Adjust the GAIN value knob 1, TREBLE value knob 3, MIDDLE value knob 4, BASS value
knob 5, and the VR GAIN value knob 2 (which corresponds to the MASTER) as you like. To
get the most accurate vintage tube amp distortion, raise the VR GAIN as high as possible.
The CH VOLUME value knob 6 lets you adjust the volume while retaining the overall sound
including the distortion produced by the Valve Reactor.
If you press the CAB button while holding down the AMP button, you can then use value
knob 3 to adjust the PRESENCE, value knob 4 to adjust the NR (Noise Reduction) effect,
and value knob 6 to adjust the volume level of the programs (PROG LVL).
Pressing the CAB button, then turning the value knob 1 lets you select a cabinet model.
When you use the AMP MODEL and CABINET MODEL selectors, a different type of guitar
amp will appear before your very eyes — or, should we say, ears!
HINT: P.32 lists recommended combinations of amp and cabinet models but others are fine too.