10
V
ALVE
R
EACTOR
T
ECHNOLOGY
T
HE
P
OWER
(
AMP
)
AND
THE
G
LORY
!
alve Reactor technology was first used on the critically acclaimed VOX AD60/120VT
Valvetronix amps.
The Valve Reactor circuitry in ToneLab LE however has been tuned-up especially for
live performance.
Since conventional modeling effects for line recording are not used directly with a
speaker, they do not include a power amp circuit, output transformer, or speaker. In other words,
they only have a preamp circuit.
A real valve amp sound, however, is produced not just by the preamp, but also by the tone and
distortion of the power amp, and by the constant changes in impedance that are created by the
power amp driving the speakers. ToneLab LE contains an actual low-wattage valve power amp
circuit, a virtual output transformer that uses solid-state components to simulate an output trans-
former, and a dummy speaker circuit that simulates the varying impedance of a real speaker.
This means that although it’s low-power, ToneLab LE has the same circuit structure of an actual
all-valve amp.
While much of the tone creation and shaping carried out is done in the digital domain, its
Valve Reactor power amp is 100% analogue. The resulting journey your guitar’s signal takes through
the analogue world of the power stage plays a major role in providing the all-important feel and tone
of the original amps we modelled.
The Valve Reactor power stage is, to all intents and purposes, a bona fide valve (tube) push-pull
power amplifier, but in miniature. It utilizes a 12AX7 (ECC83) valve (a dual triode device — meaning
“two valves in one”) and is equipped with an output transformer, like a “real” valve amp.
The power amp output of ToneLab LE’s Valve Reactor is designed to “read” the constantly changing
impedance curve of the dummy speaker circuit system and feed this information back to the virtual
output transformer — just like real valve amplifiers do. This information permits the behavior of the
valve stage of the amp to vary with the speaker load (impedance), which is another impor tant part of
“real world” valve tone.
Apart from the vital valve tone this ingenious power amp design provides, it also allows us
to replicate various “circuit characteristics” that are unique to the all-valve power stages of the amps
we’ve modelled. These “characteristics” include: Class A or Class AB operation, Presence and
Resonance (low end) control circuitry (both found in the negative feedback circuit that some, but not
all, valve power amps have). Being able to match such vital characteristics helps ensure that each
and every one of our models is as tonally authentic as possible — as opposed to the usual “close
but definitely no cigar” norm of digital modeling. And just so you know, this patented in USA power
amp technology is unique to VOX Valvetronix.
V
VOX VALVE REACTOR
FEEDBACK
CIRCUIT
(WITH OR W/O
PRESENCE &
RESONANCE)
REACTOR
AMP
USING
CONSTANT
CURRENT &
REACTIVE
FEEDBACK
MODEL
DEPENDENT
12AX7 (DUAL TRIODE)
PUSH–PULL OUTPUT
PREAMP
VIR
TU
AL OUTPUT
TRANSFORMER
CLASS A OR AB
MODEL DEPENDENT
PHASE
INVERTER
DUMMY
SPEAKER
12AX7
(ECC83)
12AX7
(ECC83)
BIAS
BIAS
Содержание Tonelab LE
Страница 1: ...Owner s Manual E 1...
Страница 59: ......