Vox Tonelab LE, Руководство пользователя

Страница: 23 / 59

Introduction
Panel Tour
Setup
Playing
Creating
and Storing
23
NOTE: If you haven’t connected an external effect processor to the INSERT RETURN jacks, the
INPUT signal will bypass the insert circuit whether the INSERT button LED is lit or dark.
A
CTIVATING OR DEACTIVATING THE
K
EY
L
OCK FUNCTION
Here’s how you can use the Key Lock function to disable ToneLab LE’s buttons, selectors, and
knobs so they can’t be accidentally changed during a live performance.
NOTE: While the Key Lock function is activated, you won’t be able to operate any controls except for
the switches, pedals and the EXIT/TUNE button.
NOTE: The Key Lock setting is cancelled when you turn off the power; it will be disabled when you turn
on the power once again.
A
CTIVATING THE
K
EY
L
OCK FUNCTION
1. If the name display shows anything other than a program name, or if the characters of the
program name are blinking, press the EXIT/TUNE button.
2. With the program name shown in the name display, press and hold the EXIT/TUNE button
for at least one second.
The name display will indicate KEY LOCK for one second, and then the value knob LEDs
will go dark.
D
EACTIVATING THE
K
EY
L
OCK FUNCTION
1. If the name display shows anything other than a program name, press the EXIT/TUNE but-
ton.
2. Press and hold the EXIT/TUNE button for at least one second.
The name display will indicate LOCK OFF for one second, and then the value knob LEDs
will light.