Vox MINI3, Руководство пользователя

Страница: 5 / 16

5
Setup
This section describes the basic setup of your amplifier.
NOTE: This manual also describes safety precautions and
functions. Be sure to read the entire manual.
1. Turn the MASTER volume on the amp all the way
down.
2. Install batteries in the amplifier. Alternatively, you can
connect the included AC adapter to the DC12V jack on
the rear panel, then plug the adapter into an AC outlet.
3. Plug your guitar into the INPUT jack on the top panel. If
you also plan to use a CD or MP3 player, or a microphone,
connect the player to the AUX IN jack or the microphone
to the MIC IN jack on the top panel.
4. Turn on the STANDBY switch.
5. Slowly raise the MASTER volume to a desired level.
Installing Batteries
Remove the battery compartment cover located on the bot -
tom of the unit by pulling the ribbon. Insert six AA-size
alkaline batteries as shown in the figure. Be sure to observe
the correct polarity.
NOTE:
Batteries are not included. You will need to purchase
them separately. Never use any type of battery other
than alkaline batteries.
NOTE:
Be sure to install batteries in the correct orientation.
Replacing the Batteries
If the indicator located above and to the left of the STANDBY
switch becomes dark, replace the batteries.
NOTE: If the battery level becomes low, noise may be gener -
ated.
NOTE:
Depleted batteries must be removed from the MINI3
immediately. If you leave them in, malfunctions such
as battery leakage may occur. You should also re -
move the batteries if you will not be using the MINI3
for an extended time.