7
EFFECTS section
Here you can adjust settings for the effects.
For details on each effect, refer to “Effects” (page 12).
9. EFFECTS knob
This knob enables you to select the effect type and set
the intensity of the effect.
To bypass the effects, rotate the knob all the way to the
left.
10. DELAY/REVERB knob
This knob enables you to select a delay/reverb-type effect
and set the intensity of the effect.
To apply an effect (selected via this knob) to the micro
-
phone input, use the DLY/REVERB SEND knob to set the
intensity of the effect.
To turn off the delay/reverb effect applied to the guitar
input, rotate this knob all the way to the left or set the
knob to the minimum position of the "swoosh" of the
corresponding effect type.
11. TAP switch, LED/TUNER LED indicator
This switch enables you to set the time of the DELAY and
REVERB effects. Tap this switch twice to set the time. The
duration between two taps will be used as the time value.
The indicator will flash in sync with the time.
HINT:
To set the time to exactly match the tempo of a
song, press the TAP button several times along
with the song.
NOTE:
If you turn off the power to the unit, the value
set by the TAP button will be reset to its initial
value.
To enable the tuner function, press and hold down the
TAP switch for more than one second. All effects will
be bypassed. When the tuner function is turned on, the
TUNER LED indicator will indicate the tuning status.
For more information, please refer to "Using the Tuner"
on page 9.
Содержание MINI3
Страница 1: ......
