5
Setting Up Your Amplifier
This section explains how to set up your amplifier.
NOTE:
This manual includes safety precautions and an explanation of the parts and functions of the
amplifier. Please read this manual throughly.
1.
Before turning the amplifier on, set the MASTER volume knob on the AGA30 a minimal level.
2.
Connect the supplied power cable to the AC power connector on the rear panel, then insert the plug on
the other end of the power cable into an appropriate AC outlet.
NOTE:
Use only the power cable that is included with the AGA30. Using another power cableÅ@may
cause malfunctions.
3.
Connect your guitar or microphone to the AGA30. If necessary, connect an external device to the AUX
IN jack or the TUNER/DIRECT OUT jack.
NOTE:
If the microphone requires phantom power, turn the PHANTOM switch on. If the microphone
does not require phantom power, turn the PHANTOM switch off.
4.
Turn on the power to the amplifier by setting the POWER switch to On.
5.
Turn up the MASTER volume knob slowly to adjust the volume level.
Содержание AGA30
