
7
TONE CONTROLS
9. TREBLE Control
This controls the high frequencies in your sound—from soft and smooth when turned down (counter clock-
wise) to bright and cutting when cranked (clockwise) and all points in-between.
NOTE!
The TREBLE Control only works with the BRILLIANT Channel.
10. BASS Control
This controls the low frequencies in your sound—from thin and light when turned down (counter clock- wise)
to warm and heavy when turned up full (clockwise) and all points in-between.
NOTE!
The BASS Control only works with the BRILLIANT Channel.
11. CUT Control
This circuit is placed in the power amp as opposed to the pre-amp section like the TREBLE and BASS con-
trols. What this does is the opposite of what you may expect. Turning it clockwise will decrease the higher fre-
quencies. Use in conjunction with the TREBLE control to fine tune the high end of your sound.
OUTPUT Section
12. POWER Switch
This is the ON/OFF switch for the amplifier. Please ensure the amplifier is switched off and unplugged be-
fore being moved.
NOTE!
Pop noise may occur if you turn off the power.
AC15HW60 Front Panel
INPUT Jack Sockets
1. VIB/TREM INPUT
Guitar input jacks for the VIB/TREM channel. The ‘HIGH’ input will give you more gain and output volume
whereas the ‘LOW’ input will be quieter and have more clean headroom.
2. NORMAL INPUT
Guitar input jacks for the NORMAL channel. The ‘HIGH’ input will give you more gain and output volume
whereas the ‘LOW’ input will be quieter and have more clean headroom.