Vox Technologies KVM08, Руководство пользователя

Страница: 17 / 25

INSTALLATION
~ 11 ~
l
RESET the MASTER unit by pressing the Bank/SCAN and Channel buttons
simultaneously. This is necessary for the MASTER unit to detect the newly added
slave unit.
l
Verify that the MASTER unit has detected the new slave by pressing the Bank/SCAN
button. If it detected the new slave properly, the LED display on the MASTER will
register the slave unit’s bank address. If you have many slave units, you may have to
press the Bank/SCAN button many times to cycle through all of the preexisting slave
units before reaching the newly added unit.
l
Now you can power up the computers connected to the newly added salve unit. After
all the computers have booted up, you may need to RESET the MASTER unit again to
detect the presence of powered computers on the new slave unit.