Vox Technologies KVM08, Руководство пользователя

Страница: 15 / 25

INSTALLATION
~ 9 ~
Step 8
Connect the first computer’s keyboard cable to the KVM 08. Using another PS/2 cable
connect one end to PS/2 keyboard port on the computer, and the other end to the PC1
keyboard port on the back of KVM08. If your computer has an AT type keyboard port,
you will need a PS/2 to AT keyboard adapter.
ON/OFF
SW
PC8 PC7
AC
90-240VAC LINE
PC6 PC5 PC4 PC3 Console PC2 PC1
Input Input /Slave Master
Slave Input
Step 9
Double-check all of the connections. Make sure the keyboard and mouse cables go to
the correct ports.
Step 10
Repeat step 6 to 8 for the remainder of the computers.
Step 11
Attach the power supply to the power jack at the back of KVM08. Plug this into
available AC outlet. Flip the power switch on the front panel. You should see the LED
for channel 1 on the front panel blink, and hear a beep. Power up your monitor.
Step 12
You can now power up all your computer simultaneously. The first computer will show
up on the monitor. Check to see if the keyboard, mouse and monitor work. If this is
okay, press the “Channel” button and check the functionality of the other computers. If
you find any errors, double-check all of the cable connections.
Note: Avoid pressing any keys on the keyboard or moving the mouse is the
currently selected port has a computer that is in the process of booting up.
This may cause the computer to not detect, or initialize the keyboard or
mouse drivers properly.
Back of PC