VOX electronics DBL-5003, Руководство по эксплуатации

Страница: 4 / 54

that the surface on which the stand is
placed is stable.
13. The iron is not to be used if it has been
dropped, if there are visible signs of
damage or if it is leaking.
14. This appliance can be used by children aged
from 8 years and above and persons with
reduced physical, sensory or mental capabil-
ities or lack of experience and knowledge if
they have been given supervision or instruc-
tion concerning use of the appliance in a safe
way and understand the hazards involved.
Children shall not play with the appliance.
Cleaning and user maintenance shall not
be made by children without supervision.
15. Keep the iron and its cord out of reach
of children less than 8 years of age
when it is energized or cooling down.
BEFORE FIRST USE
– It is normal for small amount of smoke to be produced the first time,this will quickly disappear.
– When using the steam function for the first time, do not direct the steam towards the laundry,
as there could be debris from the steam vents
FILLING WITH WATER
– We recommend the use of distilled water.
– Make sure that both the Steam Control turning Knob and Temperature Control Dial are in
“OFF” position.
– Hold the iron upright so that the water-filling inlet is in a horizontal position.
– Fill with water through Water Filling Inlet until the water reach the “MAX” mark indicated on
the side of the iron, and never fill above this mark.
SETTING TEMPERATURE
Follow the ironing instructions on the garment label. If there is no instruction but you do know the
kind of fabric, please consult the following table.
Note: If the fabric consists of various kinds of fabrics, always select the temperature required
by the most delicate fabrics.
Fabric Temperature control Temperautre requirement
Synthetic
•
Low temperature
Silk, wool
• •
Medium temperature
Cotton, linen
• • •
High temperature
STEAM IRONING
– Place the iron in a vertical position and set the temperature control dial at the minimum/low
heat setting.
– Insert the plug into the socket, and then turn the temperature control dial to the “high heat”
mark-ing. The pilot light will come on, indicating that the iron is heating up.
– When the pilot light turns off, the set temperature has been reached and the iron is ready to use.
– During ironing, the pilot light on the iron automatically switches on/off as the thermostat
maintains the set temperature (you may continue ironing during this process).
– Turn the steam control turning knob to the required position.
– Steam is produced as soon as the iron in held horizontally.
3