VOX electronics 75DSW400U Скачать руководство пользователя страница 12

Страница: 12 / 18

English

- 21 -

Zoom:

Highlight and press

to see events in a

wider time interval.

Now/Next Schedule

In this layout option, only the current and next events
of the listed channels will be displayed. You can use
the directional buttons to scroll through the list of the
events.
Press

Back/Return

button to use available tab options.

Highlight

Filter

tab and press

to see the filtering

options. To change the layout highlight

Timeline

Schedule

and press

Event Options

Use the directional buttons to highlight an event
and press

button to display

Options

menu. The

following options are available.

Select Channel:

Using this option, you can switch

to the selected channel in order to watch it. The
programme guide will be closed.

More Info:

Display detailed information on the selected

event. Use up and down directional buttons to scroll
through the text.

Set Timer on Event / Delete Timer on Event:

Select

Set Timer on Event

option and press

. You can set

timers for future events. To cancel an already set timer,
highlight that event and press the

button. Then

select

Delete Timer

on Event

option. The timer will

be cancelled.

Record / Delete Rec. Timer:

Select the

Record

option and press the

button. If the event is going

to be broadcasted at a future time, it will be added
to

Timers

list to be recorded. If the selected event is

being broadcasted at the moment, recording will start
immediately.
To cancel an already set record timer, highlight that
event and press the

button and select the option

Delete Rec. Timer

. The record timer will be cancelled.

IMPORTANT:

Connect a USB disk to your TV while the TV

is switched off. You should then switch on the TV to enable
the recording feature.

Notes:

You cannot switch to any other channel while there is

an active recording or timer on the current channel.
It is not possible to set timer or record timer for two or more
individual events at the same time interval.

Teletext Services

Press the

Text

button to enter. Press again to activate

mix mode, which allows you to see the teletext page
and the TV broadcast at the same time. Press once
more to exit. If available, sections in the teletext pages
will become colour-coded and can be selected by
pressing the coloured buttons. Follow the instructions
displayed on the screen.

Digital Teletext

Press the

Text

button to view digital teletext information.

Operate it with the coloured buttons, cursor buttons
and the

button. The operation method may differ

depending on the contents of the digital teletext. Follow

the instructions displayed on the digital teletext screen.
When the

Text

button is pressed again, the TV returns

to television broadcast.

Software Upgrade

Your TV is capable of finding and updating the firmware
automatically via the broadcast signal or via Internet.

Software upgrade search via user interface

On the main menu select

Settings>System

and then

More

. Navigate to

Software upgrade

and press the

button. Then select

Scan for upgrade

and press

button to check for a new software upgrade.

If a new upgrade is found, it starts to download the
upgrade. After the download is completed, a warning
will be displayed, press

button to complete software

upgrade process and restart TV.

3 AM search and upgrade mode

Your TV will search for new upgrades at 3:00 o’clock
if

Automatic scanning

option is set to

Enabled

and if

the TV is connected to an aerial signal or to Internet. If
a new software is found and downloaded successfully,
it will be installed at the next power on.

Note:

Do not unplug the power cord while led is blinking during

the reboot process. If the TV fails to come on after the upgrade,
unplug, wait for two minutes then plug it back in.
All updates are automatically controlled. If a manual search
is carried out and no software is found then this is the current
version.

Troubleshooting & Tips

TV will not turn on

Make sure the power cord is plugged in securely to a
wall outlet. Press the Power button on the TV.

Poor picture

Check if you have correctly tuned the TV.

Low signal level can cause picture distortion. Please
check antenna connections.

Check if you have entered the correct channel
frequency if you have performed manual tuning.

No picture

TV is not receiving any signal. Make sure the correct
source has been selected.

Is the antenna connected properly?

Is the antenna cable damaged?

Are suitable plugs used to connect the antenna?

If you are in doubt, consult your dealer.

No sound

Check if the TV sound is muted. Press the

Mute

button or increase the volume to check.

Sound may be coming from only one speaker. Check
the balance settings from Sound menu.

English

- 22 -

Remote control - no operation

The batteries may be exhausted. Replace the
batteries.

The batteries maybe inserted incorrectly. Refer to
the section “Inserting the Batteries into the Remote”.

No signal on an input source

It is possible that no device is connected.

Check the AV cables and connections from your
device.

Check the device is switched on.

The Image is not centered in VGA source

To have your TV automatically center the image, enter
the

PC Position

menu in

Picture

menu, highlight

Autoposition

and press

. Wait for it to finish. In

order to set the position of the image manually you
can use

Position

and

Position

options. Select

the desired option and use Left and Right directional
buttons on the remote to set.

Recording unavailable

To record a programme, you should first correctly
connect a USB storage device to your TV, while the
TV is switched off. You should then switch on the TV to
enable recording feature. If you cannot record, check
the storage device is correctly formatted and there is
sufficient space.

USB is too slow

If a “USB disk writing speed too slow to record”
message is displayed on the screen while starting a
recording, try restarting the recording. If you still get
the same error, it is possible that your USB storage
device does not meet the speed requirements. Try
using a different USB storage device.

PC Input Typical Display Modes

The following table is an illustration of some of the
typical video display modes. Your TV may not support
all resolutions.

Index

5HVROXWඈRQ

Frequency

640x350

85Hz

640x480

60Hz

640x480

72Hz

640x480