Turn on the heating elements by means of the rocker switches on the side panel. When the heating elements are on
the switches will illuminate. For maximum heat output both switches should be on.
When the desired room temperature has been reached, the thermostat knob should be turned slowly anti-clockwise
until the thermostat is heard to click off and the lights on the element switches are seen to go out. After this the
heater will keep the air temperature in the room at the set temperature by switching on and off automatically.
In it is minimum (fully anti-clockwise) position, the thermostat provides a frost guard position. In this position
(depending on the size of the room) the heater will maintain the temperature above freezing.
It also incorporates an internal fan, which can be switched on independently of the heating elements.
Fan Operation: This is operated by means of the switch with the fan symbol along side it. The fan will only operate
with the thermostat in the “ON” position and can be used when the heating elements are “ON” to blow warm air
into the room. In warm conditions the fan can be used with the heating elements “OFF” to blow cool air into the
room.
According to Waste of Electrical and Electronic Equipment (WEEE) directive, WEEE should be
separately collected and treated. If at any time in future you need to dispose of this product please do
NOT dispose of this product with household waste. Please send this product to WEEE collecting points
where available.
