STORING THE HEATER
When the heater is not used for long periods of time it should be protected from dust and stored in a clean dry
place.
TECHNICAL CHARACTERISTICS
VHS-30CT – Convector heater with thermostat and fan.
MAX. POWER: 2000-2200W
POWER RANGE: 750-1250-2000W
MOTOR POWER: 20W
VOLTAGE: 230V~50Hz
IMPORTANT Read these instructions fully before using the heater. Retain these instructions for future reference.
ASSEMBLY OF THE HEATER
Before using the heater, the feet (supplied separately in the carton), must be fitted to
the unit. These are to be attached to the base of the heater using that they are located
correctly in the bottom ends of the heater side moldings.
SAFETY INSTRUCTIONS (to be read before operating the heater)
Do not use the heater unless the feet are correctly attached.
Ensure the power supply to the socket into which the heater is in accordance with the rating label on the heater and
that the socket is earthed.
Keep the mains lead away from the hot body of the heater.
The heater is not intended for use in bathrooms, laundry areas or similar indoor locations. Never place the heater
where it may fall into a bathtub or other water container.
Do not use outdoors.
Do not cover or obstruct any of the heat outlet grilles or the air intake openings of the heater.
Do not place the heater on carpets having a very deep pile.
Always ensure that the heater is placed on a firm level surface. Ensure that the heater is not positioned close to
curtains or furniture as this could create a fire hazard.
Do not position the heater in front of, or immediately below, a wall socket.
Do not insert the heater in areas where flammable liquids are stored or where flammable fumes may be present.
Particular care should be taken when the heater is situated in areas occupied by children or invalids.
Always unplug the heater when moving it from one location to another.
Do not use the heater if the power cord is damaged. If the power cord is damaged it must be replaced by a
recognized service agent or other qualified person. If the plug is damaged, see Plug Replacement details below.
OPERATION OF THE HEATER
NOTE: It is normal when the heaters are turned on for the first time or when they are turned on after having not
been used for a long period of time the heaters may emit some smell and fumes. This will disappear when the
heater has been on a short while.
Choose a suitable location for the heater, taking into account the safety instructions above.
Insert the plug of the heater into a suitable socket.
Turn the thermostat knob fully in a clockwise direction to the maximum setting.
