VOSSLOH STS 40nn, Быстрое руководство

Страница: 3 / 6

Technische Information
Seite: 3/6
Datei: TI-Kurzanleitung STS-
Klemmbock
Kurzanleitung STS-Klemmbock
Änd.-Datum: 06.08.2019
Änd.-Stand: E
Quick guide - clamping system
Clamping rails:

Clean and degrease all plastics on the clamping system

Open clamping-beam and underneath lying beams

Load the bottom layer, close the beam above and hand tighten the hex bolt.

Load the middle layer, close the beam above and hand tighten the hex bolt.

Load the top layer and close the clamping-beam

Tighten the lock nuts on the clamping system until the nuts are hand-tightened and lie
flush on the clamping beam

Open the hydraulic hand-pump casing

Close the valve of the hand-pump

Operate the hand-pump lever until the overpressure noise of the pressure relief valve is
heard or a pressure of max. 350 bar is reached

Turn the hand crank, clockwise, as far as it will go

Open the valve of the hand-pump and relieve the hydraulic system

Close the hydraulic hand-pump casing
Release rail clamping:

Open the hydraulic hand-pump casing

Close the valve of the hand-pump

Operate the hand-pump lever until the overpressure noise of the pressure relief valve is
heard or a pressure of max. 350 bar is reached

Turn the hand crank, counterclockwise, as far as it will go

Open the valve of the hand-pump and relieve the hydraulic system

Close the hydraulic hand-pump casing

Loosen the lock nuts on the clamping system evenly the clamping beam is free and can
be opened

Unload the top rail layer

Loosen the screw of the underlying beam and open it

Unload the middle rail layer

Loosen the screw of the underlying beam and open it

Unload the ground rail layer

Clean and degrease all plastics of the clamping system