Vortice VORTDRY, Инструкция пользователя

Страница: 11 / 72

the side of the hairdryer. (fig. 7).
7. If you have decided to insert the cables from the side
(fig. 7B), remove the plastic part on the cover, to
allow the passage of the cables (on the right or left
side of the cover, fig. 8).
8. Fix the backplate to the wall with the provided screws
(fig. 9A). When mounting with a connector coming
from the side of the product, be careful to slide the
cable into the appropriate slot (fig. 9B).
9. Insert the conductor in the cable clamp and fix it to
the backplate (fig. 10A)
10 . Connect the cables (LINE and NEUTRAL) to the
terminal block and tighten, being careful not to over-
tighten the cables. (fig. 10B)
11 . Insert the front cover of the product to the main
body, checking that the fin controlled by the knob
(fig. 11A) is aligned with the cut on the potentiometer
(fig. 11B).
12 .Figure 12 shows the correct orientation of the knob
13. Reinsert and tighten the screws on the lower part
of the cover (fig. 13).
14 . Insert the hose (fig. 14A), turn it anticlockwise (fig.
14B) and tighten the fixing screw (fig. 14C).
Use
The appliance is automatically activated when the
handle is taken out from its seat, (fig.16), and it swit-
ches off when the handle is placed back in its seat,
(fig.17) or, alternatively, after about 12 minutes of con-
tinous operation.
The appliance is equipped with a knob on the left of
the handle seat, connected to a potentiometer that
regulates the speed and the temperature of air flow.
Wiring diagram
(Fig. 15)
Maintenance/Cleaning
This appliance does not normally require any special
maintenance. As and when necessary, simply wipe off
dust with a soft, dry cloth. If necessary, use a cloth
dampened with luke-warm water and a neutral, non-
abrasive detergent to remove more stubborn dirt. Check
that the air intake is not blocked by hair or fluff.
Disposal
IN CERTAIN EUROPEAN UNION COUNTRIES
THIS PRODUCT DOES NOT FALL WITHIN THE
REQUIREMENTS OF THE NATIONAL LAWS
IMPLEMENTING THE WEEE DIRECTIVE, AND IN
THESE COUNTRIES THE PRODUCT IS NOT
SUBJECT
TO SEPARATE DISPOSAL
OPERATIONS AT THE END OF ITS WORKING
LIFE.
Important
This product conforms to EU Directive EU
2012/19/EC.
This appliance bears the symbol of
the barred waste bin. This indicates
that, at the end of its useful life, it
must not be disposed of as
domestic waste, but must be taken
to a collection centre for waste
electrical
and electronic
equipment, or returned to a retailer
on purchase of a replacement.
It is the user's responsibility to dispose of this
appliance through the appropriate channels at the end
of its useful life. Failure to do so may incur the
penalties established by laws governing waste
disposal.
Proper differential collection, and the subsequent
recycling, processing and environmentally compatible
disposal of waste equipment avoids unnecessary
damage to the environment and possible related
health risks, and also promotes recycling of the
materials used in the appliance.
For further information on waste collection and
disposal, contact your local waste disposal service, or
the shop from which you purchased the appliance.
Manufacturers and importers fulfil their responsibilities
for recycling, processing and environmentally
compatible disposal either directly or by participating in
collective systems.
ENGLISH
11
!
Warning: Disconnect the power supply
before performing maintenance or
cleaning operations on the product.