Remote control panel (fig.31)
Installation
The remote terminal must be fitted on the panel, on a 72x56 mm hole, and secured with screws. To obtain frontal ingress
protection to IP65, use the rubber front protection pad mod. RGW-V (optional). For the purposes of wall mounting, an
adapter is available for V-KIT vertical keypads. (fig.32)
N.B. For the electrical connections to the remote control panel, please refer to the wiring diagram supplied with the unit.
N.B. In the event of a fault on the controller/remote terminal, or a wiring error, the absence of communication between the
instrument and the remote terminal will be indicated on the display with the message “noL” (no link).
43
ENGLISH
31
31
32
32
