Vortice VORT HR 300 NETI, Инструкция пользователя, Страница: 35 / 116

35
“Speed Adjustment Menu” page
Select "Speed" from the "Installer Operations menu" to access the "Speed Adjustment Menu."
Motor speed can be adjusted depending on the system flow rates, selecting:
[ ▲ ]
[ ▲ ]
060
FAN1 MIN
FAN1 MAX
[ ▲ ]
[ ▲ ]
FAN2 MIN
FAN2 MAX
FAN SPEED
FAN1 = (C) Clean air supply in room
FAN 1 MIN = Minimum speed
FAN 1 MAX = Maximum speed
FAN2 = (D) Stale air supply toward outside
FAN 2 MIN = Minimum speed
FAN 2 MAX = Maximum speed
"Alarms" page
Access the "Alarms" page only if the machine detects one of the problems detailed below:
• Pre-alarm: Filter check
occurs without blocking the machine
• Alarm : Filters to be replaced occurs without blocking the machine.
• Alarm : No Frost - Wait an hour occurs with machine block.
• Alarm : Ext Probe fault occurs without blocking the machine (No Frost, Bypass: deactivated);
• Alarm : Int Probe fault occurs without blocking the machine (Bypass: deactivated).
• Alarm : Exh Probe fault occurs without blocking the machine (No Frost deactivated).
Alarm with machine block: the messages "Alarm!" and "Block!" appear alternately on the "HOME" page.
Alarm with machine block: the messages "Alarm!" and "Block!" appear alternately on the "HOME" page.
In the presence of alarms: select the "Alarms" line and press the [

] key on the "Main menu" page.
The dialogue window opens with instructions on how to resolve the problem.
Warning:
After 2 minutes with no keys being pressed, the display returns to the "Home" page without saving any
changes.
!
MAIN MENU
USE MENU
ALARM
SETUP
INFO
[
▲
]
[ ▲ ]
[
ü ü
]
ENGLISH