• install the appliance at least 2.3 m from the floor.
(fig. 6);); If the access area is larger than the
appliance, we recommend installing two or more
units in parallel; in this case, leave a gap of 20-40
mm between one unit and the other.
• do not install the appliance in places where it could
come into contact with water, vapours, explosive
gases or corrosive substances (fig.7);
NOTE:
Before installing the product if you want to
operate it with door opening sensors, use the
appropriate terminals (4,5) as shown in the
connection diagram further on.
A Mounting on concrete walls
Fix the bolts in the right position (establish this
position using the mounting plate and pour the ce-
ment
into the bolt holes) (fig.9).
When the cement has hardened, position the
mounting plate using the washer and nut as indica-
ted in the fig.10.
Apply the central body to the uppermost part of the
mounting plate and hook it on as indicated in the
fig.11.
11
ENGLISH
6
6
>2,3 m
7
7
20 ~ 40 mm
9
9
Cemento
13-15
mm
70 mm
Ø 40-50 mm
11
11
Mounting
Remove the mounting plate by loosening the screws
fixed to the back of the central body (fig.8).
8
8
Mounting plate
Fixing screw
10
10
Washer
Elastic
washer
Nut
Fixing
plate
