background image

14  

 

Item Timeframe  Instructions 

Notes 

Seat and Seat 
Rails. 

Weekly. 

Wipe Seat Rails with lint free 
cloth.  Spray Seat Rails with a 
light coat of silicone spray. 

 

Frame. 

Weekly. 

Wipe down with lint free cloth. 

 

Tank and Water 
Treatment. 

12 months to 2 years. 

Follow instructions as specified 
in the “Water Treatment” section 
of this manual. 

 

Bungee Cord. 

Check every hundred 
hours for correct tension 
and for signs of wear. 

The Bungee Cord should last for 
many years.  If a Bungee Cord 
change is required, please fol-
low the instructions provided in 
the “Changing the Bungee 
Cord” section of this manual. 

 

Dyneema Cable.  Check monthly for signs of 

twisting, excess fraying or 
other signs of premature 
wear.  Note that a light 
“fuzz” is perfectly normal 
for  Dyneema Cable and 
will not affect performance 
or longevity in any way. 

The Dyneema Cable should 
rarely require changing, but 
should the need arise, please 
follow the instructions provided 
in the  “Changing the Dyneema 
Cable”  section of in the service 
section of the First Degree Fit-
ness website at  
 
www.firstdegreefitness.com 

 

Frame Tension 
Cable 

Check regularly for proper 
tension. 

Tighten until taut.  See Basic 
Operation page for details  

 

Maintenance chart

.  

Содержание VX-1 Fluid Rower






















Отзывы: