9
English
Resetting Your Vornado heater
Your Vornado Heater has a multi-level safety shut-off system
designed to prevent overheating. Overheating may occur when
the inlets or outlet are blocked, a foreign object prevents the
blade from turning, or the appliance tips over. If this happens,
the safety shut-off system will cut power to the heat element
and you will need to manually reset the heater.
1.
Set the POWER switch to OFF and unplug the unit.
2.
Remove any obstructions.
3.
Wait 5 –10 minutes, allowing the unit to cool down.
4.
Plug in the unit and place in desired position.
5.
Set the POWER switch to ON. Your Vornado Heater should
now function normally.
Note:
If the safety shut-off system repeatedly shuts off your
heater or if it will not reset after following the above procedure,
DO NOT ATTEMPT TO DISASSEMBLE THE UNIT. Call Vornado
Consumer Services Department toll-free at 1-800-234-0604.
Smart Remote temperature Sensor
This innovation incorporates continuous monitoring of the
temperature at the location of the remote. This temperature reading
is then transmitted back to the base unit. The TVH600 automatically
adjusts heat output and fan speed to meet and maintain the
desired temperature set. The benefit of this technology is when
you position the Smart Remote Temperature Sensor near you, the
heater will automatically adjust to meet your desired temperature
at that location. The base unit will always attempt to operate using
the sensor information from the remote, if a signal cannot be
obtained, the base unit will function on its own. Fully control the
TVH600 remotely with the Smart Remote Temperature Sensor with
illuminated screen. Turn the unit ON and OFF, select mode - FAN
ONLY, LOW HEAT or HIGH HEAT, adjust the desired set temperature
up or down, and set the automatic-off timer, all from up to 30 feet
away. As you adjust the remote, the base unit will “beep” to indicate
it has received your signal. The screen-light will dim after just a few
seconds, to minimize room illumination. The Remote does not require
“line-of-site” to operate.
illuminated touch Screen
Innovative and easy to use, the Touch Screen provides complete
control at the base unit. Just touch the screen to “wake-up” or turn
on the screen. Follow the intuitive display and touch the screen to
adjust mode, desired temperature, and timer. The Timer can be
set to turn the unit off automatically in hour intervals up to 9 hours.
The screen-light will dim after just a few seconds to minimize room
illumination. Both the remote and the base unit feature one-button
ON/OFF control.
How To Use
automatic climate control
With this unique technology, the TVH600 does not cycle on and off
like most ordinary heaters, but uses continuous variable heat and air
output to maintain the set temperature. This allows the unit to often
run on less than high power, minimizing noise and energy use, all
while maintaining your set comfort level.