7
English
Remote control Quick Start Guide
1.
Remove static cling decal from the Heater Touch Screen Display.
2.
Plug Heater into approved wall outlet. DO NOT turn Heater on.
3.
Place 2 AA batteries (included) into Remote. Aim Remote at Heater.
Recommended to be within 3 feet for programming the Heater.
4.
Press and hold the Remote POWER button for approximately
3 seconds, until display flashes one time. The Remote now has
generated a new communication signal.
5.
Press and hold the Heater POWER button for approximately 3
seconds, until the display begins to flash. The Heater is now ready to
receive the new communication signal.
6.
Press the Remote Mode button one time. The Heater display will
stop flashing and glow solid. The Remote and Heater are now linked.
7.
Set the Heater to desired heat setting, temperature setting and timer
duration. The Remote does not need to be programmed for the
Heater to function properly using only the main touch-screen display.
Note:
You should only need to set up the connection one time
upon first use of your Heater. If for some reason the Remote loses its
connection – repeat the Remote Control Quick Start Instructions.
ReMote
Mode Button
Press Once
ReMote
PoWeR Button
Press and hold
for 3 seconds
heateR diSPLaY
PoWeR Button
Press and hold
for 3 seconds
Getting Started
Tight Grill Spirals
Resists curious fingers.
Cool Touch Case
Safe to touch, even on high heat setting.
Automatic Safety Shut Off System
If airflow becomes blocked and overheating occurs,
power to the heating element and fan is shut off.
Tip-Over Protection
If tipped over, power to the heating element and fan
motor is reduced to prevent overheating.
Ideal 120°F Exit Air Temperature
Warm enough to heat an entire room.
Grounded Heavy-Duty Power Cord
Adds durability and a more secure wall connection.
Advanced Safety Features