5
English
Figure 65.1
provides a path of least resistance for the electric current to reduce the risk
of electric shock. The 3-prong plug must be inserted into a grounded outlet
that has been properly installed in accordance with all electric codes and
ordinances. If you are in doubt as to whether or not an outlet is properly
grounded, contact a qualified electrician.
This heater operates with an infrared remote control. Interference between
this remote and other remote-control-operated electrical appliances in your
home is possible.
CAUTION:
In order to avoid a hazard due to inadvertent resetting of the
thermal cutout, this appliance must not be supplied through an external
switching device, such as a timer, or connected to a circuit that is regularly
switched on and off by the utility.
This heater is for use on 120 volts. The cord has a plug as shown at A in
Figure 65.1. An adapter as shown at C is available for connecting three-
blade grounding-type plugs to two-slot receptacles. The green grounding
lug extending from the adapter must be connected to a permanent ground
such as a properly grounded outlet box. The adapter should not be used if a
three-slot grounded receptacle is available.
WARNING:
Changes or modifications to this unit not expressly approved by
the party responsible for compliance could void the user’s authority to operate
the equipment.
Note:
This equipment has been tested and found to comply with the limits
for Class B digital device, pursuant to part 15 of the FCC Rules. These limits
are designed to provide reasonable protection against harmful interference
in a residential installation. This equipment generates, uses and can radiate
radio frequency energy and, if not installed and used in accordance with
the instructions, may cause harmful interference to radio communications.
However, there is no guarantee that interference will not occur in a particular
installation. If this equipment does cause harmful interference to radio or
television reception, which can be determined by turning the equipment off
and on, the user is encouraged to try to correct the interference by one or more
of the following measures:
Reorient or relocate the receiving antenna.
Increase the separation between the equipment and the receiver.
Connect the equipment into an outlet on a circuit different from that to
which the receiver is connected.
Consult the dealer or an experienced radio/TV technician for help. This
device complies with part 15 of the FCC Rules. Operation is subject
to the following two conditions: (1) This device may not cause harmful
interference, and (2) his device must accept any interference received,
including interference that may cause undesired operation.
do not
use this heater in an RV, a boat, or in any application where a DC/AC
converter is converting battery power to AC power.
do not
use the heater on any Ground-Fault Circuit Interrupted (GFCI) circuit.
A GFCI circuit has a reset button in the middle of the outlet.
do not
use this heater on a surge protected circuit.
do not
use the heater with any kind of timer to turn the unit on or off.
do not
use this heater on a circuit that is shared with a high power device,
such as a vacuum or a circular saw.
CAUTION:
A loose fit between the outlet (receptacle) and plug may cause
overheating and distortion of the plug. Discontinue use of the product.
Contact a qualified electrician to replace loose or worn outlet.
SaVe theSe inStRuctionS
iMPoRtant inStRuctionS
Read aLL inStRuctionS BeFoRe uSinG.