Vornado SF-246, Руководство пользователя

Страница: 11 / 16

ENGLISH | 11
STEAM CLEANING
NOTE: Before operating, make sure all desired accessories are connected and Boiler is
filled with water (refer to Pages 6-10 for details).
1. For first-time use, remove protective plastic cover that is shipped on electrical plug. Insert
power cord into convenient electrical outlet. Heating Indicator Light will immediately illuminate,
indicating that unit is powered on and Boiler is heating.
CAUTION: This unit uses a grounded (3-prong) electrical plug. Use only in properly installed
3-prong electrical outlets. Do not attempt to alter plug or circumvent this safety feature.
2.
After approximately 7 minutes, Heating Indicator Light will deactivate. This indicates that Boiler
is fully heated and unit is ready to begin steaming.
3.
Direct Main Steam Nozzle (and connected attachments) towards surface you wish to steam,
and press and hold Steam Trigger.
CAUTION: Always be sure that Main Steam Nozzle and any attachments are pointed in a
safe direction (away from yourself, other people, pets and plants) before pressing Steam Trigger.
4.
Keep Steam Trigger depressed for a continuous flow of steam. You may also slide the Steam
Lock Switch backward while holding down the trigger to lock it down (FIGURE 8). This will allow
a continuous flow of steam without the need of holding down the Steam Trigger manually.
5.
Using a slight back-and-forth motion over the area you are steaming will further enhance the
cleaning process. Wipe steamed areas with a clean cloth to remove loosened dirt and grime.
CAUTION: Wiping the area while it is still wet is recommended, but use care when wiping
surfaces such as metal that may still be hot.
NOTE: During use, the Heating Indicator Light may illuminate, accompanied by a slight
drop in steam pressure. This is normal – after a few moments, the light will shut off
once again and performance will return to normal.
6.
To effectively kill bacteria and other microorganisms, hold Main Steam Nozzle (and any connected
accessories) approximately 1/2 inch from surface and press Steam Trigger. Keep trigger held
to concentrate steam on the same spot for at least 5 seconds.
7. At its maximum capacity (33 oz. / 975 ml.), the unit will provide approximately 30 minutes of
continuous steam. If you wish to continue steaming, unplug electrical plug from power outlet
and refer to Refilling section on Page 10 for details.
8. Once you are finished using your Portable Steam Cleaner, immediately unplug power cord
from electrical outlet. Refer to Storage & Care guidelines on Page 12 for proper cleaning and
storage procedures.
FIGURE 8