3.3.3 WAN Settings: In this page you can configure the IP Phone WAN port’s setting. The WAN port is for you to
connect to the ADSL Router, Broadband Router. Also you can use PPPoE to get the WAN IP address from your
ISP.
3.3.3.1 The IP Phone’s default setting is NAT mode. If you don’t need to use the NAT Mode, you can chang to
Bridge Mode. If you change the setting to Bridge Mode, then the LAN setting will not effect and will be the
same as WAN port.
3.3.3.2 The WAN port default is DHCP Client mode, You can change the setting to Fixed IP Mode, or PPPoE
Mode.
3.3.3.3 If you change the WAN port’s setting to Fix IP Mode, then you have to make sure the IP address. Net
Mask, Gateway, and DNS setting is suitable in your current network environment.
3.3.3.4 If you change the WAN port’s setting to PPPoE Mode, you have to input a correct username/password
to get the IP address from your Internet Service Provider.
3.3.3.5 When you finished the setting, please click the Submit button.
3.3.3.6 If there is nothing need to change, please click the Save Change Item in the left side, then click the
Save button. The change you made will save into the system and the system will Reboot automatically.
