![background image](http://html.mh-extra.com/html/voptech/vi2010/vi2010_user-manual_1050099011.webp)
4.2.3.1.2 Busy Forward.
1
Activation: To Enabled/Disabled this function.
2
Number: Forward to a Speed Dial Number.
4.2.3.1.3 No Answer Forward.
1
Activation: To Enabled/Disabled this function.
2
Number: Forward to a Speed Dial Number.
4.2.3.1.4 Ring Timeout: Set the Ring times to start the no answer forward function, ex: 2 means after 2
rings then forward to the dedicated number.
4.2.3.2 Block Setting
1
All: Block all incoming call.
2 By
Time
3
Duration: Set the start time and end time to Block Setting.
4.2.3.3 Date/Time setting: Date and Time Setting.
4.2.3.3.1 Date & Time: Set the IP Phone Date and Time.
4.2.3.3.2 SNTP setting
4.2.3.3.2.1 SNTP : Enabled / Disable SNTP.
4.2.3.3.2.2 Primary SNTP: Set Primary SNTP server IP address.
4.2.3.3.2.3 Secondary SNTP: Set Secondary SNTP server IP address.
4.2.3.3.2.4 Time zone: Set Time zone.
4.2.3.3.2.5 Adjustment Time: Set adjustment time period.
4.2.3.4 Volume and Gain
4.2.3.4.1 Handset volume: Set Handset volume from 0~15 (max.) for you to hear.
4.2.3.4.2 Speaker volume: Set Spearer phone volume from 0~15 (max.) for you to hear.
4.2.3.4.3 Handset Gain: Set Handset Gain from 0~15 (max.) for the other site to haer.
4.2.3.4.4 Speaker Gain: Set Spearer phone Gain from 0~15 (max.) for the other site to haer.
4.2.3.5 Ringer
4.2.3.5.1 Ringer volume: Ringer volume setting from 0~15 (max.).
4.2.3.5.2 Ringer type: Ringer tone selection from 1~4.
4.2.3.6 Auto Dial: Set Auto Dial time from 3~9 seconds.
4.2.3.7 Auto Answer: This function will active on IP Phone with FXO interface. Set Auto Answr for user can
re-dial a call from IP call to PSTN call or from PSTN call to IP call.
4.2.3.8 Answer Counter: This function will active on IP Phone with FXO interface. Set Auto Answer will active
after the numbers of ring.
4.2.4 Network
4.2.4.1 WAN Setup
4.2.4.1.1 IP Type
1
Fixed IP client
2 DHCP
client
3 PPPoE
client
4.2.4.1.2 Fixed IP setting
4.2.4.1.2.1 IP Address
4.2.4.1.2.2 Subnet mask
4.2.4.1.2.3 Default Gateway
4.2.4.1.2.4 MAC address
4.2.4.1.3 PPPoE setting
4.2.4.1.3.1 User name
4.2.4.1.3.2 Password