voptech E02 Скачать руководство пользователя страница 38

Страница: 38 / 64

38 / 64

8.3

SYSTEM / Information

User can get the system information of the device in this page including.



Model



Hardware Version



Software Version



Uptime



Last uptime



MEMInfo

And also summarization of network status,



Network Mode



MAC



Subnet Mask



Default Gateway

Besides, summarization of SIP account status,



SIP User



SIP account status ( Registered / Unapplied / Trying / Timeout )

8.4

SYSTEM / Account

User may change his/her web authentication password in this page.
For users with Administrators privilege, the user can also manage user accounts by adding or deleting

user account and assign privilege and password to new account.

There are two types of user privilege, Administrators and Users. If a user account is created as Users

privilege, this account will have limited accessibility to the device and cannot change some device settings.

The user account can be used to operate the device or access the device web portal by login to the

device or its web. User should log in to device web portal with his/her username and web password.

NOTICE! The device is shipped with a default Administrators user account.

The username and

password for the default

account

is ‘admin’

which has been printed on the brand and model label, at

the bottom side of the device.

8.5

SYSTEM / Configurations

Users with administrators privilege can export or import the device configuration in this page and reset

the device to factory default.

Содержание E02

































































Результаты поиска

Содержание E02

Отзывы:

Похожие инструкции для E02

Бренды по названию

Популярные бренды

voptech E02, Руководство пользователя

Результаты поиска

Содержание E02

Отзывы:

Похожие инструкции для E02

Бренды по названию

Популярные бренды