Vook VDT23xxME-BH, Быстрый старт

Страница: 14 / 14

4/8/16-CH DVR Quick Start Guide
12
check the network settings of the DVR.
 Enter into Record Setup to set network video parameters like resolution, frame
rate etc.
 Open IE on a computer on the same network. Input the IP address of the DVR in
IE address bar and press enter. If HTTP port is not 80, add the port number after IP
address.
 IE will download ActiveX component automatically. Enter the username and
password in the subsequent window
10.2 Access DVR on WAN
1. Connect the DVR to internet through router or virtual server
 Please enter into Menu

Setup

Network Setup as shown above.
 Input IP address, Subnet, Gateway. If using DHCP, please enable DHCP in both
the DVR and the router.
 Forward IP address and port number in Virtual Server setup of the router or virtual
server. Configure the firewall to allow accessing the DVR. (If the user has enabled
the UPnP function in both the DVR and router, he can skip this step. Please refer to
the relevant chapter for more details.)
 Open IE browser, input IP address, or dynamic domain name and enter. If HTTP
port is not 80, add the port number after IP address or domain name.
 IE will download ActiveX automatically. Then a window pops up and asks for
user name and password. Input name and password correctly, and enter to view.
2. Connect the DVR to Internet through PPPoE
 Enter into the DVR
‟
s Main Menu

Setup

Network interface to enable PPPoE
and then input user name and password received from your ISP. Next, click „Apply
‟.
The DVR will connect to the server and would give a confirmation message.
 If users want to utilize dynamic domain name, please apply for a domain name in
a DNS server supported by the DVR or router. Then add to the DVR or router.
 When accessing the remote interface of DVR, user can input WAN IP/domain
name to access directly (user can enter into Main menu

Information

Network
interface to check IP address). The browser will download Active X control.
 The following steps are the same as the connection way above.
VOOK