Vook VDT2304SS-B, Руководство пользователя

Страница: 30 / 103

DVR User Manual
24
4.4.2 Motion
This tab allows to setup schedule for motion based recording.
Step1: Enter into Menu

Setup

Schedule

Motion tab. Refer to Fig 4-16:
Step2: The setup steps for schedule for motion based recording are similar to
normal schedule setup. You can refer to 4.4.1 Schedule for details.
Note: The default schedule of motion based recording is 24x7, that is, the
color of schedule settings interface is dark blue. This enables motion based
recording for 24x7. If you want to activate motion based recording, you must
enable motion alarm and setup schedule for motion alarm (Refer to Chapter
4.5.2 Motion Alarm for more details).
Fig 4-16 Schedule Configuration-Motion
4.5 Alarm Configuration
Alarm configuration includes four sub menus: motion, video loss, other alarm and alarm out.
4.5.1 Motion
Motion includes two sub menus: motion and schedule.
The steps to set up motion alarm are as follows:
Step1: Enter into Menu

Setup

Alarm

Motion tab. Refer to Fig 4-17:
Step2: Enable motion alarm, set alarm hold time which refers to the time till
which the system will wait for further detection of motion. Eg. If the holding
time is set to 10 seconds, once the system detects a motion, it will go into alarm
but would not detect any other motion alarm (specific to channel) until 30
seconds. If there is other motion detected during this period, it is considered it
as continuous movement, otherwise it will be considered as a single motion.
Fig 4-17 Alarm Configuration-Motion
VOOK