Vook VDT2304SS-B, Руководство пользователя

Страница: 18 / 103

DVR User Manual
12
3 Basic Function Instruction
3.1 Startup & Shutdown
Please make sure all the connections are done properly before you power on the unit. Proper startup and shutdown are crucial to expanding
the life of your DVR.
3.1.1 Startup
Step1: Connect with the source power.
Step2: The device will boot and the power LED would turn blue.
Step3 A WIZZARD window will pop up and show some information about time zone
，
time setup
，
network configuration, record
configuration and disk management. User can setup here and refer to the concrete setup steps from the corresponding chapters. If users
don‘t want to setup Wizard, please click Exit button to exit.
Press and hold Fn key to switch the output among VGA, HDMI and CVBS.
3.1.2 Shutdown
You can shut down the device by using IR remote controller and mouse.
By IR remote controller:
Step1: Press Power button. This will bring up a shutdown window. The unit will shut down by clicking ―OK
‖
button.
Step2: Disconnect the power
By mouse:
Step1:Click Menu and select ―Shut Down
‖
icon. This will take you to a shutdown window.
Step2: Click OK. Then the unit will power off after a while.
Step3: Disconnect the power
VOOK