P
0
1
2
OPERATION -
JUICING
•
Assemble the BLENDING JUG and CROSS BLADE
BASE as described in the previous section. Attach to
the MAIN UNIT.
CAUTION: Ensure the appliance is unplugged before
fitting the BLENDING JUG/CROSS BLADE BASE to
the MAIN UNIT.
•
Place the FILTER into the BLENDING JUG, aligning
the 4 notches on the FILTER with the small ribs in the
BLENDING JUG interior.
•
Fit the JUG COVER to the top of the BLENDING
JUG.
•
Insert the power cord into a suitable mains socket.
The POWER LIGHT will illuminate
red.
•
Switch on the Blender using the SPEED SELECTOR.
Turn to
speed 1,
then carefully insert your sliced
ingredients into the hole in the centre of the JUG
COVER.
NOTE: Ensure the ingredients are sliced into suitable
sized pieces to fit into the centre of the JUG COVER.
IMPORTANT: The 4 in 1 Blender is suitable for use
with fruit and
soft
vegetables only.
CAUTION: Do not overfill the FILTER with
ingredients to prevent them clogging around the
cross blades. Ensure the maximum juicing volume of
1L is not exceeded.
•
Using the PUSHER, firmly press the ingredients down
the centre of the FILTER.
WARNING! To avoid injurty, never use your fingers
to insert ingredients into the BLENDING JUG, always
use the PUSHER.
CAUTION: Do not use the Blender continuously for
more than
1 minute
at a time. If further juicing is
required, allow the appliance to rest first.
NOTE: During breaks, we recommend unplugging
the appliance, detaching the BLENDING JUG from
the MAIN UNIT and pouring out the juice that has
been made into a BEAKER or CUP. This will also
allow you to remove any pomace collected within
the FILTER so as not to overload the appliance.
•
Once juicing has finished, simply switch off the
appliance using the SPEED SELECTOR and unplug
from the mains. Remove the FILTER and disassemble
the appliance as previously described.
•
Store any remaining juice in a BEAKER or CUP with
a CUP LID attached and refrigerate until ready for
consumption.
4
P
0
1
2
