VonShef.com
•
Place the 4 in 1 Blender on a stable, level, heat-
resistant work surface.
•
Fix the CROSS BLADE BASE to the bottom of the
BLENDING JUG by turning the CROSS BLADE
BASE anticlockwise.
•
Attach the assembled BLENDING JUG and CROSS
BLADE BASE to the MAIN UNIT by aligning the 3
pegs on the BLENDING JUG with the 3 notches in
the MAIN UNIT.
•
Firmly press down and twist clockwise to lock into
position.
IMPORTANT: The appliance will not function
properly if the BLENDING JUG and MAIN UNIT
have not been correctly aligned.
•
Add your ingredients to the BLENDING JUG. Add
some water if necessary.
IMPORTANT: The 4 in 1 Blender is suitable for use
with fruit and
soft
vegetables only.
CAUTION: Do not exceed the maximum capacity
of 1.5L.
•
Fit the JUG COVER to the top of the BLENDING
JUG. Align the arrow indication marker on the
JUG COVER with the handle on the JUG and turn
clockwise to lock into position.
•
Sit the COVER CAP in the centre of the JUG
COVER and plug in the Blender. The POWER
LIGHT will illuminate to indicate that the Blender is
ready to use.
•
Turn the SPEED SELECTOR to
speed 1
to begin
blending. If you wish to pulse your ingredients,
turn and hold the SPEED SELECTOR to the
P
(Pulse) function.
CAUTION: Do not operate continuously for more
than
1 minute
at a time. If further blending is
required, allow the appliance to rest for 5 minutes
before continuing.
P
0
1
2
OPERATION -
BLENDING
BEFORE FIRST USE
Before using this appliance for the first time, please ensure you complete the following
steps:
•
Remove all packaging and labels.
•
Inspect the product for any damage and check
that all listed parts are included.
•
Before initial use, wash all removable
components using warm soapy water and dry
thoroughly.
CAUTION: Take extra care when cleaning the
BLADE BASES as the attached blending blades
are very sharp.
•
Wipe down the MAIN UNIT using a clean damp
cloth.
WARNING! Do not immerse the MAIN UNIT in
water or any other liquid.
•
Once the desired consistency has been
achieved, turn the SPEED SELECTOR to the ‘0’
position to switch off the Blender, unplug and
leave to cool. Remove the BLENDING JUG and
pour out contents.
