VONROC MS506AC, Оригинальное руководство пользователя

Страница: 10 / 32

10
EN
WWW.VONROC.COM
ELECTRICAL SAFETY
When using electric machines always observe the
safety regulations applicable in your country to
reduce the risk of fire, electric shock and personal
injury. Read the following safety instructions and
also the enclosed safety instructions.
Always check that the power supply
corresponds to the voltage on the rating
plate.
Replacing cables or plugs
Immediately throw away old cables or plugs when
they have been replaced by new ones. It is dange-
rous to insert the plug of a loose cable in the wall
outlet.
Using extension cables
• As a supply for this machine always use an
unloaded line and/or an extension cable with
conductors of at least 1,5 mm2 and protected
with a 16 A fuse. Be sure that this extension
cable is not longer than 20 metres.
• This machine can be switched to the singlep-
hase network (230-240 V/50 Hz). If you are in
doubt about the earth of the electricity provisi-
ons, consult an electrician first.
2. MACHINE INFORMATION
Intended use
The electro tool is intended as a stationary machine
for making straight lengthways and crossways cuts
in wood. Horizontal mitre angles of -45° to +45° as
well as vertical bevel angles of -45° are possible.
TECHNICAL SPECIFICATIONS
Model No. MS506AC
Mains voltage 230-240 V, 50Hz
Capacity 1900 W
Machine class II (double insulated)
No load speed 5.000/min
Saw blade measurement 254x2.4x30mm
Angle for mitring 45° (left and right)
Angle for bevelling 45° (only left)
Mitre saw maximum sawing
capacity:
Mitre 0° - Bevel 0°
Mitre 45° - Bevel 45°
Mitre 45° - Bevel 0°
Mitre 0° - Bevel 45°
70x310mm
40x210mm
70x210mm
40x310mm
Weight 12.55 kg
Lpa (sound pressure) 94.5+3 dB(A)
Lwa (acoustic capacity) 108.4+3 dB(A)
Vibration level <2.5 m/s2
Vibration level
The vibration emission level stated in this instruc-
tion manual has been measured in accordance with
a standardised test given in EN 62841-1; it may
be used to compare one tool with another and as
a preliminary assessment of exposure to vibration
when using the tool for the applications mentioned
- using the tool for different applications, or with
different or poorly maintainted accessories,
may significantly increase the exposure level
- the times when the tool is switched off or when
it is running but not actually doing the job, may
significantly reduce the exposure level
Protect yourself against the effects of vibration by
maintaining the tool and its accessories, keeping
your hands warm, and organizing your work patterns.
DESCRIPTION
The numbers in the text refer to the diagrams on
page 2-5.
1. Lock-off button
2. Handle
3. On/off switch
4. Protective guard
5. Retracting protective guard
6. Saw blade
7. Adjustable fence
8. Knob for table extension
9. Fence
10. Table extension
11. Table
12. Mounting holes
13. Kerf plate
14. Knob for mitre adjustment
15. Lever for mitre adjustment
16. Scale for mitre angle
17. Indicator for mitre angle