27
Residual heat indication
After the switching off of a heating zone or the complete stop of the hob, the heating zones are
still hot. This is indicated by displaying [ H ] symbol.
The symbol [ H ] disappears when the heating zones may be touched safely.
As long as the residual heat indicators are on, don’t touch the heating zones and don’t
put any
heat sensitive object on them.
There are risks of burn and fire.
Booster function
The Booster function [ P ] and the Double Booster [
] add a boost of power to the selected
heating zone.
If this function is activated the heating zones work for 10 minutes with an ultra high power.
Booster is needed for example to heat up rapidly big quantities of water, like rice, pasta or
noodles.
x
Start up / Stop the booster function:
Action
Control panel
Display
Start up the Booster
Slide to the end of th
e “SLIDER”
[ P ]
Or press directly on the end of
the “SLIDER”
Stop the Booster
Slide on the “SLIDER“
[ 9 ] to [ 0 ]
x
Start up / Stop the double booster function:
Action
Control panel
Display
Start up the Booster
Slide to the end of the
“SLIDER”
[ P ]
Or press directly on the end of
the “SLIDER”
Start up the Double Booster
Press 2 times
the end of the “SLIDER”
[
and P ]
Stop the Double Booster
Slide on the “SLIDER“
[ 0 ] to [ P ]
x
Power management:
When it comes to the power, the cooking zones are running by pairs and cannot exceed an
overall maximum of power. If the selected heating levels for both zones exceed the maximum
available amount of power, the powermanagement function is automatically reducing the power
from one of these zones. The display of this zone is first blinling ; the level is then automatically
reduced to the highest suitable position.
Heating zone selected
The other heating zone: (example: power level 9)
[ P ] is displayed
[ 9 ] goes to [ 8 ] and blinks
Timer
The timer is able to be used simultaneous with all heating zones and this with different time
settings (from 1 to 999 minutes) for each heating zone.
x
Setting and modification of the cooking time :
Action
Control panel
Display
Select the power level
slide on the “SLIDER“
[ 1 ] to [ P ]
Select theTimer
Press simultaneously key [ - ] and [ + ] Timer display on
from the timer until the
desired display is on
Decrease the time
Press key [ - ] from the timer
[ 60 ] to 59, 58...
Increase the time
Press key [ + ] from the timer
Time increase
After a few seconds, the [ min ] display stops with blinking.
The time is confirmed and the timer starts.
Содержание EKI8050/6FLEX
Страница 55: ......