VonHaus 3500127, Инструкция по эксплуатации

Страница: 7 / 16

WARNING
Please read and understand these Safety Warnings, Safety Symbols and Instructions carefully and retain
for future use
functioning before putting it down
Disconnect an air tool from the air supply
before performing any servicing, or
changing any staples/nails.
Ensure all are correctly fitted before
reconnecting to air supply
Ensure the air tool is switched OFF before
connecting to air supply. Be aware that air
tools may hold residual pressure after use.
Always bleed air pressure from the tool
after shutting off air supply Do not abuse
the machine
Do not overload the machine. Allowing
the machine to work at its optimum speed
is more efficient and prolongs its service
life.
Do not increase air pressure above the
recommended level; excessive pressure
leads to wear of moving parts, possible
failure and may cause the machine casing
to split.
Do not attempt to modify air tools. Any
attempt to modify this air tool could result in serious injury to you or others, and will
invalidate its warranty.
Do not aim the nailer away from the
workpiece when connected to an air
supply.
Never operate the tool with the safety
mechanism disabled.
Never aim the tool towards other people
in the work area or towards the main
reservoir tank of the air compressor
Do not operate the nailer when using
ladders or scaffolding
Never connect this tool to canisters or
bottles containing combustible gases
or portable compressed air canisters or
cartridges. It is designed to be used with
an air compressor
SAFETY SYMBOLS
WARNING! Pay
attention to all
safety and
guidance
Read manual
before use
Wear a dust
mask
Wear protective
gloves
Do not use on
scafolding and
ladders
Do not connect
to compressed air
canisters.
Wear eye and
ear protection
The following safety symbols may appear on this product. Please ensure you understand their meanings before
operating this product in order to prevent personal injury and avoid damage to the tool.