ATTACHING THE DISC
ATTENTION
Ensure the Power Tool is unplugged from the mains before performing
any assembly or maintenance tasks.
Place the
INTERNAL FLANGE (9)
over the
SPINDLE
SHAFT (2)
, ensuring it seats correctly onto the head
of the spindle.
Place the required disc
on top of the
INTERNAL
FLANGE (9)
, ensuring the bore fits over the step of
the
INTERNAL FLANGE (9)
.
Mount the concaved recess of the
EXTERNAL
FLANGE (8)
over the spindle.
Hand-tighten the
EXTERNAL FLANGE (8)
to the
required disc to temporarily secure.
Reverse this process to remove the required disc.
4
9
4
11
4
8
4
7
4
8
4
11
4
9
IMPORTANT
Press down the
SPINDLE
LOCK BUTTON (6)
firmly.
Keeping it pressed down, tighten the
EXTERNAL FLANGE (8)
clockwise
with the
SPANNER (7)
until tight.
IMPORTANT
Allow the Angle Grinder to run
in idle for at least 1 minute with the required
disc now securely fastened.
NEVER
Use a vibrating disc. This should
immediately be replaced.
4
2
