WARNING
PLEASE READ THESE INSTRUCTIONS CAREFULLY AND KEEP FOR FUTURE REFERENCE
better control of the power tool in
unexpected situations.
Disconnect the plug from the power
source and/or the battery back from
the power tool before making any
adjustments, changing accessories
or storing. Such preventative safety
measures reduce the risk of starting the
power tool accidentally.
The blade will continue to move after
releasing the switch. Always switch the
tool off and wait for the blade to come to
a complete standstill before putting the
tool down.
Do not touch the workpiece or the blade
immediately after operating the tool.
They can become very hot.
STORAGE & MAINTENANCE.
Store idle power tools out of reach
of children and do not allow persons
unfamiliar with the power tool or these
instructions to operate the power tool.
Power tools are dangerous in the hands
of untrained users.
Maintain the power tool. Check for
misalignment or binding of moving
parts, breakage of parts and any other
condition that may affect the power tool’s
operation. If damaged, have the power
tool repaired before use. Many accidents
are caused by poorly maintained power
tools.
Keep cutting tools sharp and clean.
Properly maintained cutting tools with
sharp cutting edges are less likely to bind
and are easier to control.
Keep blades sharp. Dull or damaged
blades may cause the Angle Grinder to
swerve or stall under pressure. Always use
the appropriate type of blade/sandpaper
for the work-piece material and type of
cut/sanded.
When cutting pipe or conduit, make sure
that they are free from water, electrical
wiring, etc.
Never use dull blades in the tool. They
will cut slower, leave rough cuts and
break easily due to added pressure and
excessive heat. They will also overload
the motor and cause premature failure of
the tool.
Have your power tool serviced by a
qualified repair person using identical
replacement parts only to ensure that the
safety of the power tool is maintained. Do
not attempt repairs yourself.
The following safety symbols may appear on this product. Please ensure you understand their
meanings before operating the Angle Grinder in order to prevent personal injury
and avoid damage to the tool.
Pay attention
to all safety and
guidance
Read manual
before use
Wear a dust
mask
Wear protective
gloves
Wear eye and
ear protection
SAFETY SYMBOLS
3
