Volvo XC90 VNS, Руководство пользователя

Страница: 42 / 84

03 Advanced user mode
Setting a destination
03
40
Selecting an address
G033461
Selecting a street address
Set destination Address
The system will place the cursor on Street.
The most recently selected State and City will
be pre-selected.
1. To change the state or city, use the
navigation control to move to
State
and/or
City
,
2. Press
ENTER
, or choose among the most
recently chosen alternatives with .
NOTE
The definition of a city or area may vary. It
will sometimes be an entire city, or a par-
ticular section of a city.
The system does not contain street
addresses for very small towns or villages.
In these cases, the center of the town is
used as the destination.
Alternative 1
•
Select
Street
without choosing a city.
The system will provide guidance to the mid-
point of the selected street. If the street exists
in more than one city, a list of alternatives will
be displayed.
Alternative 2
1. Begin by selecting a
City
.
2. Select a
Street
.
Selecting a street number
If the address selected has a street number,
this can be used as a specific destination.
1. After selecting a street, go to the
Number
row and press ENTER
or
Go directly to
Set
. Alternative street num-
bers will be displayed.
2. Go to Set
after you have entered a street
number.
> If a street number has not been
entered, the system will guide you to
the mid-point of the selected street.
Set
Confirms the entered number.
Adjust
Returns to the previous screen.
Selecting an intersection
•
Go to Interse. and choose a street that
intersects the selected street.
Start guidance
•
Go to Set to add the entered address to
the itinerary.
•
Go to
Start guidance
to begin receiving
directions to the destination.
Information
Provides information about the destination.